Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento
Wireless
Radio
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
65
5
•
TSPEC Voice ACM Limit—The upper limit on the amount of traffic the WAP device
attempts to transmit on the wireless medium using a voice AC to gain access. The
default limit is 20 percent of total traffic.
attempts to transmit on the wireless medium using a voice AC to gain access. The
default limit is 20 percent of total traffic.
•
TSPEC Video ACM Mode —Regulates mandatory admission control for the video
access category. By default, TSPEC Video ACM mode is off. The options are:
access category. By default, TSPEC Video ACM mode is off. The options are:
-
On — A station is required to send a TSPEC request for bandwidth to the WAP
device before sending or receiving a video traffic stream. The WAP device responds
with the result of the request, which includes the allotted medium time if the TSPEC
was admitted.
device before sending or receiving a video traffic stream. The WAP device responds
with the result of the request, which includes the allotted medium time if the TSPEC
was admitted.
-
Off — A station can send and receive video priority traffic without requiring an
admitted TSPEC; the WAP device ignores video TSPEC requests from client
stations.
admitted TSPEC; the WAP device ignores video TSPEC requests from client
stations.
•
TSPEC Video ACM Limit—The upper limit on the amount of traffic that the WAP
device attempts to transmit on the wireless medium using a video AC to gain access.
The default limit is 15 percent of total traffic.
device attempts to transmit on the wireless medium using a video AC to gain access.
The default limit is 15 percent of total traffic.
•
TSPEC AP Inactivity Timeout—The amount of time for a WAP device to detect a
downlink traffic specification as idle before deleting it. The valid integer range is from
0 to 120 seconds and the default is 30 seconds.
downlink traffic specification as idle before deleting it. The valid integer range is from
0 to 120 seconds and the default is 30 seconds.
•
TSPEC Station Inactivity Timeout—The amount of time for a WAP device to detect an
uplink traffic specification as idle before deleting it. The valid integer range is from 0
to 120 seconds and the default is 30 seconds.
uplink traffic specification as idle before deleting it. The valid integer range is from 0
to 120 seconds and the default is 30 seconds.
•
TSPEC Legacy WMM Queue Map Mode—Enables or disables the intermixing of
legacy traffic on queues operating as ACM. By default, this mode is off.
legacy traffic on queues operating as ACM. By default, this mode is off.
STEP 5
Click Save. The changes are saved to the Startup Configuration.
!
CAUTION
After new settings are saved, the corresponding processes may be stopped and restarted. When
this happens, the WAP device may lose connectivity. We recommend that you change WAP
device settings when a loss of connectivity will least affect your wireless clients.
this happens, the WAP device may lose connectivity. We recommend that you change WAP
device settings when a loss of connectivity will least affect your wireless clients.