Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point Manual De Mantenimiento
Client Quality of Service
Class Map
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
127
7
1024 to 49151—Registered Ports
49152 to 65535—Dynamic and/or Private Ports
•
EtherType—Compares the match criteria against the value in the header of an Ethernet
frame.
frame.
Select an EtherType keyword or enter an EtherType value to specify the match criteria.
-
Select from List—Matches the Ethertype in the datagram header with the selected
protocol types: appletalk, arp, ipv4, ipv6, ipx, netbios, pppoe.
protocol types: appletalk, arp, ipv4, ipv6, ipx, netbios, pppoe.
-
Match to Value—Matches the Ethertype in the datagram header with a custom
protocol identifier that you specify. The value can be a four-digit hexadecimal
number in the range of 0600 to FFFF.
protocol identifier that you specify. The value can be a four-digit hexadecimal
number in the range of 0600 to FFFF.
•
Class of Service—A class of service 802.1p user priority value to be matched for the
packets. The valid range is from 0 to 7.
packets. The valid range is from 0 to 7.
•
Source MAC Address—A source MAC address to compare against an Ethernet frame.
•
Source MAC Mask—The source MAC address mask specifying which bits in the
destination MAC to compare against an Ethernet frame.
destination MAC to compare against an Ethernet frame.
For each bit position in the MAC mask, a 0 indicates that the corresponding address bit
is significant and a 1 indicates that the address bit is ignored. For example, to check only
the first four octets of a MAC address, a MAC mask of 00:00:00:00:ff:ff is used. A
MAC mask of 00:00:00:00:00:00 checks all address bits and is used to match a single
MAC address.
is significant and a 1 indicates that the address bit is ignored. For example, to check only
the first four octets of a MAC address, a MAC mask of 00:00:00:00:ff:ff is used. A
MAC mask of 00:00:00:00:00:00 checks all address bits and is used to match a single
MAC address.
•
Destination MAC Address—The destination MAC address to compare against an
Ethernet frame.
Ethernet frame.
•
Destination MAC Mask—The destination MAC address mask specifying which bits in
the destination MAC to compare against an Ethernet frame.
the destination MAC to compare against an Ethernet frame.
For each bit position in the MAC mask, a 0 indicates that the corresponding address bit
is significant and a 1 indicates that the address bit is ignored. For example, to check only
the first four octets of a MAC address, a MAC mask of 00:00:00:00:ff:ff is used. A
MAC mask of 00:00:00:00:00:00 checks all address bits and is used to match a single
MAC address.
is significant and a 1 indicates that the address bit is ignored. For example, to check only
the first four octets of a MAC address, a MAC mask of 00:00:00:00:ff:ff is used. A
MAC mask of 00:00:00:00:00:00 checks all address bits and is used to match a single
MAC address.
•
VLAN ID—A VLAN ID to be matched for packets. The VLAN ID range is
from 0 to 4095.
from 0 to 4095.
The following Service Type fields show for IPv4 only. You can specify one type of service
to use in matching packets to class criteria.
to use in matching packets to class criteria.