Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point Manual De Mantenimiento
Simple Network Management Protocol
Users
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
136
8
-
view-all—The group is allowed to view and read all MIBs.
-
view-none—The group cannot view or read MIBs.
STEP 5
Click Save. The group is added to the SNMPv3 Groups list and your changes are saved to the
Startup Configuration.
Startup Configuration.
NOTE
To remove a group, select the group in the list and click Delete.
Users
You can use the SNMP Users page to define users, associate a security level to each user, and
configure security keys per-user.
configure security keys per-user.
Each user is mapped to an SNMPv3 group, either from the predefined or user-defined groups,
and, optionally, is configured for authentication and encryption. For authentication, only the
MD5 type is supported. For encryption, only the DES type is supported. There are no default
SNMPv3 users on the WAP device, and you can add up to eight users.
and, optionally, is configured for authentication and encryption. For authentication, only the
MD5 type is supported. For encryption, only the DES type is supported. There are no default
SNMPv3 users on the WAP device, and you can add up to eight users.
SNMP Users
To add SNMP users:
STEP 1
Select SNMP > Users in the navigation pane.
STEP 2
Click Add to create a new row in the SNMPv3 Users table.
STEP 3
Check the box in the new row and click Edit.
STEP 4
Configure the parameters:
•
User Name—A name that identifies the SNMPv3 user. User names can contain up to 32
alphanumeric characters.
alphanumeric characters.
•
Group—The group that the user is mapped to. The default groups are RWAuth, RWPriv,
and RO. You can define additional groups on the SNMP Groups page.
and RO. You can define additional groups on the SNMP Groups page.