Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point Manual De Mantenimiento
Administration
Download/Backup Configuration File
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
49
3
•
Startup Configuration—Configuration file type used when the WAP device last booted.
This does not include any configuration changes applied but not yet saved to the WAP
device.
This does not include any configuration changes applied but not yet saved to the WAP
device.
•
Backup Configuration—Backup configuration file type saved on the WAP device.
•
Mirror Configuration—If the Startup Configuration is not modified for at least 24 hours,
it is automatically saved to a Mirror Configuration file. The Mirror Configuration file is
a snapshot of a past Startup Configuration. The Mirror Configuration is preserved
across factory resets, so it can be used to recover a system configuration after a factory
reset by copying the Mirror Configuration to the Startup Configuration.
it is automatically saved to a Mirror Configuration file. The Mirror Configuration file is
a snapshot of a past Startup Configuration. The Mirror Configuration is preserved
across factory resets, so it can be used to recover a system configuration after a factory
reset by copying the Mirror Configuration to the Startup Configuration.
STEP 7
Click Save to begin the backup. For HTTP backups, a window appears to enable you to
browse to the desired location for saving the file.
browse to the desired location for saving the file.
Downloading a Configuration File
Downloading a Configuration File
You can download a file to the WAP device to update the configuration or to restore the WAP
device to a previously backed-up configuration.
device to a previously backed-up configuration.
To download a configuration file to the WAP device:
STEP 1
Select Administration > Download/Backup Configuration File in the navigation pane.
STEP 2
Select Via TFTP or Via HTTP/HTTPS as the Transfer Method.
STEP 3
Select Download (PC to AP) as the Save Action.
STEP 4
For a TFTP download only, enter the Source File Name with an .xml extension. Include the
path (where the file exists on the server) and enter the TFTP Server IPv4 Address.
path (where the file exists on the server) and enter the TFTP Server IPv4 Address.
The filename cannot contain the following characters: spaces, <, >, |, \, : , (, ), &, ; , #, ? , *, and
two or more successive periods.
two or more successive periods.
STEP 5
Select which configuration file on the WAP device that you want replaced with the
downloaded file: the Startup Configuration or the Backup Configuration.
downloaded file: the Startup Configuration or the Backup Configuration.
If the downloaded file overwrites the Startup Configuration file, and the file passes a validity
check, then the downloaded configuration takes effect the next time the WAP device reboots.
check, then the downloaded configuration takes effect the next time the WAP device reboots.
STEP 6
Click Save to begin the upgrade or backup. For HTTP downloads, a window appears to enable
you to browse to select the file to download. When the download is finished, a window
indicates success.
you to browse to select the file to download. When the download is finished, a window
indicates success.