Cisco Cisco WAP551 Wireless-N Single Radio Selectable Band Access Point Manual De Mantenimiento
Administration
Packet Capture
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
55
3
Packet Capture
To configure packet capture settings:
STEP 1
Configure these parameters:
•
Capture Beacons—Enables or disables the capturing of 802.11 beacons detected or
transmitted by the radio.
transmitted by the radio.
•
Promiscuous Capture—Enables or disables promiscuous mode when the capture is
active.
active.
In promiscuous mode, the radio receives all traffic on the channel, including traffic that
is not destined to this WAP device. While the radio is operating in promiscuous mode,
it continues serving associated clients. Packets not destined to the WAP device are not
forwarded.
is not destined to this WAP device. While the radio is operating in promiscuous mode,
it continues serving associated clients. Packets not destined to the WAP device are not
forwarded.
As soon as the capture is completed, the radio reverts to nonpromiscuous mode
operation.
operation.
•
Radio Client Filter—Enables or disables the WLAN client filter to capture only frames
that are transmitted to, or received from, a WLAN client with a specified MAC address.
that are transmitted to, or received from, a WLAN client with a specified MAC address.