Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point Manual De Mantenimiento
Wireless
Scheduler
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
82
5
•
Key 2 to Key 4—The RADIUS key associated with the configured backup RADIUS
servers. The server at Server IP (IPv6) Address 2 uses Key 2, the server at Server IP
(IPv6) Address 3 uses Key 3, and so on.
servers. The server at Server IP (IPv6) Address 2 uses Key 2, the server at Server IP
(IPv6) Address 3 uses Key 3, and so on.
•
Enable RADIUS Accounting—Tracks and measures the resources a particular user has
consumed such as system time, amount of data transmitted and received, and so on.
consumed such as system time, amount of data transmitted and received, and so on.
If you enable RADIUS accounting, it is enabled for the primary RADIUS server and
all backup servers.
all backup servers.
•
Active Server—Enables the administrative selection of the active RADIUS server,
rather than having the WAP device attempt to contact each configured server in
sequence and choose the first server that is up.
rather than having the WAP device attempt to contact each configured server in
sequence and choose the first server that is up.
Broadcast Key Refresh Rate—The interval at which the broadcast (group) key is
refreshed for clients associated with this VAP.
refreshed for clients associated with this VAP.
The default is 300 seconds. The valid range is from 0 to 86400 seconds. A value of 0
indicates that the broadcast key is not refreshed.
indicates that the broadcast key is not refreshed.
•
Session Key Refresh Rate—The interval at which the WAP device refreshes session
(unicast) keys for each client associated with the VAP.
(unicast) keys for each client associated with the VAP.
The valid range is from 0 to 86400 seconds. A value of 0 indicates that the session key
is not refreshed.
is not refreshed.
Scheduler
The Radio and VAP Scheduler allows you to configure a rule with a specific time interval for
VAPs or radios to be operational, which automates the enabling or disabling of the VAPs and
radio.
VAPs or radios to be operational, which automates the enabling or disabling of the VAPs and
radio.
One way you can use this feature is to schedule the radio to operate only during the office
working hours in order to achieve security and reduce power consumption. You can also use
the Scheduler to allow access to VAPs for wireless clients only during specific times of day.
working hours in order to achieve security and reduce power consumption. You can also use
the Scheduler to allow access to VAPs for wireless clients only during specific times of day.
The WAP device supports up to 16 profiles. Only valid rules are added to the profile. Up to 16
rules are grouped together to form a scheduling profile. Periodic time entries belonging to the
same profile cannot overlap.
rules are grouped together to form a scheduling profile. Periodic time entries belonging to the
same profile cannot overlap.