Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point Manual De Mantenimiento

Client Quality of Service

Policy Map

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

128

7

•

IP DSCP—A differentiated services code point (DSCP) value to use as a match 
criterion:

-

Select from List—A list of DSCP types. 

-

Match to Value—A DSCP value that you specify, from 0 to 63.

•

IP Precedence (IPv4 only)—Matches the packet's IP Precedence value to the class 
criteria IP Precedence value. The IP Precedence range is from 0 to 7.

•

IP TOS Bits (IPv4 only)—Uses the packet's Type of Service bits in the IP header as 
match criteria. 

The IP TOS bit value ranges between (00 to FF). The high-order three bits represent the 
IP Precedence value. The high-order six bits represent the IP Differentiated Services 
Code Point (DSCP) value.

STEP  3

Click Save. The changes are saved to the Startup Configuration.

NOTE

To delete a class map, select it in the Class Map Name list and click Delete. The class map 
cannot be deleted if it is already attached to a policy.

Policy Map

Packets are classified and processed based on defined criteria. The classification criteria is 
defined by a class on the Class Map page. The processing is defined by a policy's attributes on 
the Policy Map page. Policy attributes may be defined on a per-class instance basis and 
determine how traffic that matches the class criteria is handled.

The WAP device supports up to 50 policy maps. A policy map can contain up to 10 class 
maps.

To add and configure a policy map: