Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point Manual De Mantenimiento
LAN
VLAN and IPv4 Address Settings
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
54
4
VLAN and IPv4 Address Settings
You can use the VLAN and IPv4 Address Settings page to configure settings for the LAN
interface, including static or dynamic IPv4 address assignment.
interface, including static or dynamic IPv4 address assignment.
To configure LAN settings:
STEP 1
Select LAN > VLAN and IPv4 Address in the navigation area.
VLAN and IPv4 Address
The page shows Global Settings and IPv4 Settings. The Global Settings area shows the MAC
address of the LAN interface port. This field is read-only.
address of the LAN interface port. This field is read-only.
STEP 2
Configure these Global Settings:
•
Untagged VLAN—Enables or disables VLAN tagging. When enabled (the default), all
traffic is tagged with a VLAN ID.
traffic is tagged with a VLAN ID.
By default all traffic on the access point uses VLAN 1, the default untagged VLAN.
This means that all traffic is untagged until you disable the untagged VLAN, change the
untagged traffic VLAN ID, or change the VLAN ID for a VAP or client using RADIUS.
This means that all traffic is untagged until you disable the untagged VLAN, change the
untagged traffic VLAN ID, or change the VLAN ID for a VAP or client using RADIUS.
•
Untagged VLAN ID—Specifies a number between 1 and 4094 for the untagged VLAN
ID. The default is 1. Traffic on the VLAN that you specify in this field is not be tagged
with a VLAN ID when forwarded to the network.
ID. The default is 1. Traffic on the VLAN that you specify in this field is not be tagged
with a VLAN ID when forwarded to the network.