Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento

Access Points

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

157

The Access Points page allows you to enable or disable Single Point Setup on a 
WAP device, view the cluster members, and configure the location and cluster 
name for a member. You can also click the IP address of a member to configure 
and view data on that device. 

To configure the location and name of an individual Single Point Setup cluster 
member:

Select Single Point Setup > Access Points in the navigation pane.

Single Point Setup is disabled by default on the WAP device. When disabled, the 
Enable Single Point Setup button is visible. If Single Point Setup is enabled, the 
Disable Single Point Setup button is visible. You can edit Single Point Setup 
options only when Single Point Setup is disabled.

Icons on the right side of the page indicate whether Single Point Setup is enabled 
and, if it is, the number of WAP devices that are currently joined in the cluster.

With Single Point Setup disabled, configure the following information for each 
individual member of a Single Point Setup cluster.

•

Location—Enter a description of where the access point is physically 
located, for example, Reception. The location field is optional.

•

Cluster Name—Enter the name of the cluster for the WAP device to join, for 
example Reception_Cluster.

Bandwidth Utilization

Port Settings

Bonjour

VLAN and IPv4

IPv6 Address 

WDS Bridge

IPv6 Tunnel

WPS

Packet Capture

WorkGroup Bridge