Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento

Using the Access Point Setup Wizard

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

6

address>) to the local intranet zone. The IP address can also be specified 
as the subnet IP address, so that all addresses in the subnet are added to 
the local intranet zone.

•

If you have multiple IPv6 interfaces on your management station, use the 
IPv6 global address instead of the IPv6 local address to access the WAP 
device from your browser.

By default, the web-based AP configuration utility logs out after 10 minutes of 
inactivity. See 

 for instructions on changing the default 

timeout period.

To log out, click Logout in the top right corner of the web-based AP configuration 
utility.

The first time that you log into the WAP device (or after it has been reset to the 
factory default settings), the Access Point Setup Wizard appears to help you 
perform initial configurations. Follow these steps to complete the wizard:

If you click Cancel to bypass the Wizard, the Change Password page appears. You 
can then change the default password for logging in. For all other settings, the 
factory default configurations apply.

You must log in again after changing your password.

Click Next on the Welcome page of the Wizard. The Configure Device - IP 
Address window appears.

Click

 

Dynamic IP Address (DHCP) if you want the WAP device to receive an IP 

address from a DHCP server. Or select Static IP Address to configure IP Address 
manually. For a description of these fields, see 

Click Next. The Single Point Setup — Set a Cluster window appears. For a 
description of Single Point Setup, see 

.

To create a new Single Point Setup of WAP devices, select Create a New Cluster 
and specify a New Cluster Name. When you configure your devices with the 
same cluster name and enable Single Point Setup mode on other WAP devices, 
they automatically join the group.