Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point Manual De Mantenimiento

Policy Map

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

123

•

VLAN ID—A VLAN ID to be matched for packets. The VLAN ID range is 
from 0 to 4095.

The following Service Type fields show for IPv4 only. You can specify one type 
of service to use in matching packets to class criteria.

•

IP DSCP—A differentiated services code point (DSCP) value to use as a 
match criterion:

-

Select from List—A list of DSCP types. 

-

Match to Value—A DSCP value that you specify, from 0 to 63.

•

IP Precedence (IPv4 only)—Matches the packet's IP Precedence value to 
the class criteria IP Precedence value. The IP Precedence range is from 0 to 
7.

•

IP TOS Bits (IPv4 only)—Uses the packet's Type of Service bits in the IP 
header as match criteria. 

The IP TOS bit value ranges between (00 to FF). The high-order three bits 
represent the IP Precedence value. The high-order six bits represent the IP 
Differentiated Services Code Point (DSCP) value.

Click Save. The changes are saved to the Startup Configuration.

To delete a class map, select it in the Class Map Name list and click Delete. The 
class map cannot be deleted if it is already attached to a policy.

Packets are classified and processed based on defined criteria. The classification 
criteria is defined by a class on the Class Map page. The processing is defined by 
a policy's attributes on the Policy Map page. Policy attributes may be defined on a 
per-class instance basis and determine how traffic that matches the class criteria 
is handled.

The WAP device supports up to 50 policy maps. A policy map can contain up to 
10 class maps.

To add and configure a policy map: