Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point Manual De Mantenimiento

System Summary

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

13

•

Serial Number—The serial number of the Cisco WAP device.

•

Base MAC Address—The WAP MAC address.

•

Firmware Version (Active Image)—The firmware version number of the 
active image.

•

Firmware MD5 Checksum (Active Image)—The checksum for the active 
image.

•

Firmware Version (Non-active)—The firmware version number of the 
backup image.

•

Firmware MD5 Checksum (Non-active)—The checksum for the backup 
image.

•

Host Name—A name assigned to the device.

•

System Uptime—The time that has elapsed since the last reboot.

•

System Time—The current system time.

•

The TCP/UDP Service table shows basic information about protocols and 
services operating on the WAP.

•

Service—The name of the service, if available.

•

Protocol—The underlying transport protocol that the service uses (TCP or 
UDP).

•

Local IP Address—The IP address, if any, of a remote device that is 
connected to this service on the WAP device. All indicates that any IP 
address on the device can use this service.

•

Local Port—The port number for the service.

•

Remote IP Address—The IP address of a remote host, if any, that is using 
this service. All indicates that the service is available to all remote hosts that 
access the system.

•

Remote Port—The port number of any remote device communicating with 
this service.

•

Connection State—The state of the service. For UDP, only connections in 
the Active or Established states appear in the table. The TCP states are:

-

Listening—The service is listening for connection requests.