Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento

6

Cisco WAP571/E Administration Guide

113

This section describes the spectrum analyzer function on the AP device.

The Spectrum Analysis feature provides comprehensive monitoring of the radio 
frequency (RF) environment for real-time management of a wireless network. The 
feature provides a wireless network administrator with the ability to view both 
real-time and historical information about the RF environment. 

The Spectrum Analysis can scan all of the IEEE 802.11 channels in the 2.4 GHz and 
5 GHz frequency bands for non-Wi-Fi interference, classify the interference, and 
record the interference events in local event logs at the edge of the network.

The Spectrum Analyzer can record the following interference: analog cordless 
phone, wireless video camera, microwave oven, S-band Motion Detector, 
Narrowband jammer, Wideband jammer, and Unknown interferer.

The Spectrum Analyzer page provide the status of spectrum analyzer capability 
and provide the link to view the spectrum data.

To configure the Spectrum Analyzer:

Select Spectrum Analyzer in the navigation pane.

Select the radio interface on which to configure Spectrum Analyzer (Radio 1 or 
Radio 2).

Spectrum Analyzer is only supported one radio at the same time. 

Click Set. The changes are saved to the Startup Configuration. 

Press View Spectrum Data button to launch spectrum viewer.

The Spectrum Viewer can only be accessed through an IPv4 address.