Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento

ACL Rule

Cisco WAP571/E Administration Guide

140

•

Destination Port—Includes a destination port in the match condition for the 
rule. The destination port is identified in the datagram header.

-

Select From List—If selected, choose the port name from the list.

-

Match to Port—Enter the IANA port number to match to the source port 
identified in the datagram header. The port range is 0 to 65535 and 
includes three different types of ports:

0 to 1023-Well Known Ports

1024 to 49151-Registered Ports

49152 to 65535-Dynamic and/or Private Ports

-

Mask—Enter the port mask. The mask determines which bits are used 
and which bits are ignored. Only the hexadecimal digit (0 - 0xFFFF) is 
allowed. 0 means the bit matters and 1 means that we should ignore this 
bit.

•

IPv6 Flow Label—Specifies a 20-bit number that is unique to an IPv6 
packet. It is used by end stations to signify QoS handling in routers (range 0 
to 1048575).

•

IPv6 DSCP—Matches the packets based on their IP DSCP value. If 
selected, choose one of these options as the match criteria:

-

Select From List—Choose one of these values: DSCP Assured 
Forwarding (AS), Class of Service (CS), or Expedited Forwarding (EF).

-

Match to Value—Enter a custom DSCP value, from 0 to 63.

Click Save. The changes are saved to the Startup Configuration.

To delete an ACL, ensure that it is selected in the ACL Name-ACL Type list, check 
Delete ACL, and click Save.

To configure a MAC ACL:

Select ACL > ACL Rule. 

In the ACL Name field, enter the name to identify the ACL.