Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento

IPv6 Setting

Cisco WAP571/E Administration Guide

66

•

Connection Type—By default, the DHCP client on the WAP device 
automatically broadcasts the requests for network information. If you want to 
use a static IP address, you must disable the DHCP client and manually 
configure the IP address and other network information.

Choose one of these options:

-

DHCP—The WAP device acquires its IP address from a DHCP server on 
the LAN.

-

Static IP—Manually configure the IPv4 address. The IPv4 address 
should be in a form similar to xxx.xxx.xxx.xxx (192.0.2.10).

•

Static IP Address, Subnet Mask, and Default Gateway—If you want to assign 
a static IP address, enter the IP information in these fields.

•

Domain Name Servers—Select one of the following options:

-

Dynamic—The WAP device acquires the DNS server addresses from a 
DHCP server on the LAN.

-

Manual—Manually configure one or more DNS server addresses. Enter 
up to two IP addresses in the fields provided.

Click Save. The changes are saved to the Startup Configuration.

After new settings are saved, the corresponding processes may be stopped and 
restarted. When this condition happens, the WAP device may lose connectivity. We 
recommend that you change the WAP device settings when a loss of connectivity 
will least affect your wireless clients.

IPv6 Setting

Use the IPv6 Setting page to configure the WAP device to use IPv6 address.

To configure IPv6 address settings:

Select LAN > IPv6 Setting.

Configure these parameters: