Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manual De Mantenimiento
Wireless
Networks
Cisco WAP571/E Administration Guide
95
5
Click Enable pre-authentication if you want WPA2 wireless clients to send
pre- authentication packets. The pre-authentication information is relayed
from the WAP device that the client is currently using to the target WAP
device. Enabling this feature can help speed up authentication for roaming
clients who connect to multiple APs.
pre- authentication packets. The pre-authentication information is relayed
from the WAP device that the client is currently using to the target WAP
device. Enabling this feature can help speed up authentication for roaming
clients who connect to multiple APs.
This option does not apply if you selected WPA for WPA Versions because
the original WPA does not support this feature.
the original WPA does not support this feature.
Client stations configured to use WPA with RADIUS must have one of these
addresses and keys:
addresses and keys:
-
A valid TKIP RADIUS IP address and RADIUS Key
-
A valid CCMP (AES) IP address and RADIUS Key
•
Use Global RADIUS Server Settings—By default, each VAP uses the
global RADIUS settings that you define for the WAP device (see
global RADIUS settings that you define for the WAP device (see
). However, you can configure each VAP to use a different set of
RADIUS servers.
To use the global RADIUS server settings, make sure the check box is
selected.
selected.
To use a separate RADIUS server for the VAP, uncheck the box and enter the
RADIUS server IP address and key in these fields:
RADIUS server IP address and key in these fields:
•
Server IP Address Type—The IP version that the RADIUS server uses.
You can toggle between the address types to configure IPv4 and IPv6
global RADIUS address settings, but the WAP device contacts only the
RADIUS server or servers for the address type that you select in this field.
global RADIUS address settings, but the WAP device contacts only the
RADIUS server or servers for the address type that you select in this field.
•
Server IP Address 1 or Server IPv6 Address 1—The address for the
primary RADIUS server for this VAP.
primary RADIUS server for this VAP.
If IPv4 is selected as the Server IP Address Type, enter the IP address of
the RADIUS server that all VAPs use by default, for example, 192.168.10.23.
If IPv6 is selected, enter the IPv6 address of the primary global RADIUS
server, for example, 2001:DB8:1234::abcd.
the RADIUS server that all VAPs use by default, for example, 192.168.10.23.
If IPv6 is selected, enter the IPv6 address of the primary global RADIUS
server, for example, 2001:DB8:1234::abcd.
•
Server IP Address 2 to 4 or Server IPv6 Address 2 to 4—Up to three IPv4
and/or IPv6 addresses to use as the backup RADIUS servers for this VAP.
and/or IPv6 addresses to use as the backup RADIUS servers for this VAP.
If authentication fails with the primary server, each configured backup
server is tried in sequence.
server is tried in sequence.