Cisco Cisco WAP561 Wireless-N Dual Radio Selectable Band Access Point Notas de publicación
Release Notes for the Cisco WAP551 and WAP561 Wireless Access Points
1
Release Notes
Cisco WAP551 and WAP561 Wireless Access Points,
Firmware Version 1.0.4.4
Firmware Version 1.0.4.4
Version 1.0.4.4
December, 2013
These release notes describe the open issues for the Cisco WAP551 and WAP561 Wireless
Access Points.
Access Points.
Requirements
•
Your computer must meet the recommended hardware and software requirements.
•
A computer with Browser support for:
-
Internet Explorer v7.0 or later
-
Chrome v5.0 or later
-
Firefox v3.0 or later
-
Safari v3.0 or later
Limitations
CSCud33819—WAP5x1 access points do not have a real-time clock (RTC) so they cannot
store the system time. System time will show it correctly as long as you do not reboot the
access point. Cisco recommends using NTP to set system time.
store the system time. System time will show it correctly as long as you do not reboot the
access point. Cisco recommends using NTP to set system time.
Resolved Issues
•
CSCuf27908
—
When using MAC authentication with a Radius server, the AP may
hang then reboot when the soft watchdog timer expires.
•
CSCue51459
—
Unable to save redirect URL with a ‘/’ in captive portal instance.