Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Notas de publicación

Release Notes

Open Caveats

These are the open caveats for firmware version 1.0.3.4.

Table 1

Open Caveats in Firmware Version 1.0.3.4

Ref Number

Description

CSCuf60672

Symptom:

When the WAP551 or WAP561 is factory-reset using the reset button, the firmware MD5

checksum information of the non-active image is not preserved. After the AP comes back up, it shows
an error message.

Workaround:

There is no functional impact on any of the images; the checksum is simply not

displayed. Using the web GUI to reset the AP to factory defaults will avoid this issue. Also, the
customer can push the reset button longer than 10 seconds to reset the AP to the default factory
settings. The customer can then update an image to overwrite the non-active image. The error
will not appear in this case.

CSCud34239

Symptom:

Special characters can be entered for the administrator password, but they do not work.

Workaround:

Use normal characters in the administrator password.

CSCud38345

Symptom:

Loading and refreshing response time occasionally takes longer than 2 seconds.

Workaround:

None.

CSCud33855

Symptom:

The MAC filter list permits identical MAC addresses without displaying a warning

message.

Workaround:

Do not use the same MAC address in the MAC filter list.

CSCud70917

Symptom:

The WMM function does not work with upstream.

Workaround:

This issue does not affect the customer, it is only used for functional integrity.

CSCue70448

Symptom:

Deleting an SNMP group (related with a user1) prevents the addition of any other SNMP

users unless user1 is first deleted.

Workaround:

Delete the group and all users in the group at the same time.

CSCty22825

Symptom:

Telnet and SSH have been disabled in the GUI and SNMP.

Workaround:

None.

CSCue85888

Symptom:

WDS and WGB can be enabled at the same time, but this should not be allowed.

Workaround:

None, an error message should be issued for this condition.