Cisco Cisco Aironet 1200 Access Point Notas de publicación
9
Release Notes for Cisco Aironet 1200 Series Access Points Running Firmware Version 12.01T1
OL-3739-01
Caveats
Caveats
This section lists resolved and open software issues in firmware version 12.01T1.
Getting Bug Information on Cisco.com
If you are a registered Cisco user, you can use the Cisco TAC Software Bug Toolkit, which consists of
three tools (Bug Navigator, Bug Watcher, and Search by Bug ID Number) that help you identify existing
bugs (or caveats) in Cisco software products.
three tools (Bug Navigator, Bug Watcher, and Search by Bug ID Number) that help you identify existing
bugs (or caveats) in Cisco software products.
Access the TAC Software Bug Toolkit at
.
Open Caveats
The following caveats have not been resolved for firmware version 12.01T1:
•
CSCdy03381—One access point radio on dual-mode access points sometimes fails to restart after a
warm reset.
warm reset.
Workaround: Perform a cold reboot of the access point if one of the radios does not restart.
•
CSCdz04380—Incorrect values are advertised for CWMin and CWMax on Voice VLAN.
When a voice VLAN using Cisco IP phones is configured with default settings (CSMin=31,
CWMax=31), the values advertised by the access point in the beacons and probes are CWMin=7 and
CWMax=255.
CWMax=31), the values advertised by the access point in the beacons and probes are CWMin=7 and
CWMax=255.
There is no workaround for this caveat.
•
CSCdz50218—Access point does not update home or foreign agent status when advertisement flags
change.
change.
When a local home or foreign agent is disabled on the router, the access point does not detect the
change from the the advertisement flags it receives. The access point continues to list the agent
addresses on the Statistics page.
change from the the advertisement flags it receives. The access point continues to list the agent
addresses on the Statistics page.
Workaround: Disable and then enable proxy Mobile IP.
•
CSCdy10787—The access point aborts any configuration containing an unknown MIB variable.
When an access point receives a configuration from another access point that is running a newer
firmware version than the receiving access point, the receiving access point aborts the configuration
if it encounters a MIB variable that it does not recognize.
firmware version than the receiving access point, the receiving access point aborts the configuration
if it encounters a MIB variable that it does not recognize.
Workaround: Upgrade access points to the same firmware version before distributing
configurations.
configurations.
•
CSCdy11906—When WEP is enabled and you set all WEP keys to not set, WEP is still enabled but
the web-browser page indicates that WEP is disabled.
the web-browser page indicates that WEP is disabled.
Workaround: To disable WEP, select no encryption from the Use of Data Encryption by Stations is
drop-down menu on the Radio Data Encryption page.
drop-down menu on the Radio Data Encryption page.