Cisco Cisco Aironet 1200 Access Point Referencia técnica
Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide
Implementing the Cisco SWAN Framework
16
Cisco Structured Wireless-Aware Network (SWAN) Implementation Guide
OL-6217-01
Figure 6
CiscoSecure ACS NAS Setup
Step 8
Repeat Steps 2 through 7 for each WDS-host device.
Step 9
Restart the CiscoSecure ACS service by selecting Submit + Restart after completing the tasks through
Step 7. Or you can select System Configuration on the left-hand side menu, then Service Control, and
then Restart.
Step 7. Or you can select System Configuration on the left-hand side menu, then Service Control, and
then Restart.
Adding Username and Password Credentials
Each infrastructure access point presents a username and password to the WDS when it authenticates.
These credentials must be defined on the CiscoSecure ACS and do not have to be unique per
infrastructure access point. Most implementations use a single username and password credential pair
for all of the infrastructure access points. To add the username and password credentials into the
CiscoSecure ACS, follow these steps:
These credentials must be defined on the CiscoSecure ACS and do not have to be unique per
infrastructure access point. Most implementations use a single username and password credential pair
for all of the infrastructure access points. To add the username and password credentials into the
CiscoSecure ACS, follow these steps:
Step 1
Log into the CiscoSecure ACS server.
Step 2
Select User Setup on the left-hand side menu (see Figure 7).
Step 3
Enter a username in the User field, then select Add/Edit (see Figure 7).