Cisco Cisco Catalyst Blade Switch 3030 for Dell Libro blanco

 

Design Guide 

Correlation of Server and Switch Ports 

Server Slot 1  

Server Slot 2  

Server Slot 3  

Server Slot 4  

Server Slot 5  

Server Slot 6  

Server Slot 7  

Server Slot 8  

Server Slot 9  

Server Slot 10  

Server Slot 11  

Server Slot 12  

Server Slot 13  

Server Slot 14  

Server Slot 15  

Server Slot 16  

Copper GE Uplink Port 1 

Copper GE Uplink Port 2 

Copper GE Uplink Port 3 

Copper GE Uplink Port 4 

SFP Port on TwinGig Module Port 1 

SFP Port on TwinGig Module Port 2 

SFP Port on TwinGig Module Port 3 

SFP Port on TwinGig Module Port 4 

10 GE Uplink Port (CBS3130X only) 

10 GE Uplink Port (CBS3130X only) 

Management Interface 

 
For interface names above the “x” indicates the member number.  Interface FastEthernet0 (fa0) is 
connected internally to the CMC.  Only the Fa0 interface on the master switch will be active when 
the switch is operating in Virtual Blade Switch (VBS) mode. 

The Cisco Catalyst Blade Switch 3130 provides enhanced Layer 2 and Layer 3 services to Blade 
Servers. The CBS3130 ships standard with the IPBase software license, providing all the layer 2+ 
features Data Center customers are used to in the other Catalyst products. The CBS3130 family of 
switches now also supports basic routing functions: RIP and Static Routing, and EIGRP stub. The 
Cisco CBS3130 enhances basic Layer 2/3 switching by including Cisco proprietary protocols, 
access control lists (ACLs), and quality of service (QoS) based on Layer 3 information. With Simple 
Network Management Protocol (SNMP), command-line interface (CLI), or HTTP management 
options available and a robust set of Cisco IOS

®

 Software switching features, the Cisco Catalyst 

Blade Switch 3130 naturally integrates into the data center environment. The following features 
highlight this capacity: 

 

© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 

Page 6 of 29