Cisco Cisco ONS 15216 (EDFA3) Metropolitan Regional DWDM System Guía De Instalación
Procedure
Step 1
Unscrew the captive screws to remove the Interleaver/Deinterleaver (I/D) or the Coupler/Splitter blank cover from the
patch panel as shown in the following figure:
patch panel as shown in the following figure:
Figure 9: Removing the Interleaver/Deinterleaver or Coupler/Splitter Blank Cover
Captive screw
2
Interleaver/Deinterleaver or Coupler/Splitter blank
cover
cover
1
Front plate
3
During an in-field upgrade, all the fibers installed previously must be routed toward the left fiber bend radius
controller. To plug in the pluggable, the space in front of the I/D blank cover must be free of fibers and cables.
controller. To plug in the pluggable, the space in front of the I/D blank cover must be free of fibers and cables.
Note
14