Cisco Cisco Prime IP Express 8.3 Referencia técnica
available. This is formatted as a hexadecimal string with
a hyphen as separator between each octet. This might be
used for names generated for CPEs behind a customer's
DOCSIS 3.0 cable modem (if the customer has multiple CPEs,
a name collision and disambiguation will likely result).
Note: Several of these methods may cause privacy concerns if
the DNS is accessible from the Internet.
a hyphen as separator between each octet. This might be
used for names generated for CPEs behind a customer's
DOCSIS 3.0 cable modem (if the customer has multiple CPEs,
a name collision and disambiguation will likely result).
Note: Several of these methods may cause privacy concerns if
the DNS is accessible from the Internet.
view-id
Identifies the view associated with the forward and
reverse zones used for DNS update.
reverse zones used for DNS update.
dhcp-interface
dhcp-interface - Configures the DHCP server's network interfaces
Synopsis
dhcp-interface <name> create [<attribute>=<value>]
dhcp-interface <name> delete
dhcp-interface list
dhcp-interface listnames
dhcp-interface listbrief
dhcp-interface <name> show
dhcp-interface <name> set <attribute>=<value> [attribute>=<value> ...]
dhcp-interface <name> get <attribute>
dhcp-interface <name> unset <attribute>
dhcp-interface <name> delete
dhcp-interface list
dhcp-interface listnames
dhcp-interface listbrief
dhcp-interface <name> show
dhcp-interface <name> set <attribute>=<value> [attribute>=<value> ...]
dhcp-interface <name> get <attribute>
dhcp-interface <name> unset <attribute>
dhcp-interface <name> enable <attribute>
dhcp-interface <name> disable <attribute>
dhcp-interface <name> disable <attribute>
Description
The dhcp-interface command configures network interfaces for use
by the Network Registrar DHCP server. If there are no defined
interfaces, the server discovers and uses all available
interfaces on the system. When this list is present, the server
uses only the available interfaces, if any, that match this list.
by the Network Registrar DHCP server. If there are no defined
interfaces, the server discovers and uses all available
interfaces on the system. When this list is present, the server
uses only the available interfaces, if any, that match this list.
Examples
Status
See Also
Attributes
Attributes
address
Specifies the IP address and subnet mask length of one or more
interfaces that the DHCP server should use.
interfaces that the DHCP server should use.
ip6address
Specifies the IPv6 address and prefix length of one or more
interfaces that the DHCP server should use.
interfaces that the DHCP server should use.
multicast-addresses
(obj(0)) default = ff02::1:2,ff05::1:3