Cisco Cisco Video Assurance Management Solution 3.0 Notas de publicación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
17
Release Notes for Cisco Video Assurance Management Solution 3.0
OL-16499-03
Open Caveats
CSCth14227
CMM trap forwarding of BridgeTech traps does not send alarm text
Symptom
BridgeTech video probe traps forwarded by CMM do not have the alarmtext varbind set.
Conditions
Value sent by BridgeTech probe to CMM. For example:
BtechAlarm-MIB::alarmTextT.1 (1.3.6.1.4.1.24562.300.1.8.1):
aty=ETH|stn=VIDMON_41|sta=239.0.1.41|stp=45001|ssm=172.16.1.250|CC skips:35
discontinuities:5 - counting
Value forwarded by CMM:
BtechAlarm-MIB::alarmTextT.1 (1.3.6.1.4.1.24562.300.1.8.1): aty
Workaround
None.
CSCth03817
VAMS CIC dashboard VOD service scalability
Conditions
The VAMS 3.0 Service dashboard in CIC creates a child service per video on demand (VOD) flow under
the source VOD server in the dashboard service tree. This might result in a performance issue when using
the VAMS 3.0 dashboard in a large scale VOD environment. A rules change is required to not create the
VOD flow child service in the service tree and to instead populate the VOD event under the corresponding
VOD server that is the source of the VOD flow.
the source VOD server in the dashboard service tree. This might result in a performance issue when using
the VAMS 3.0 dashboard in a large scale VOD environment. A rules change is required to not create the
VOD flow child service in the service tree and to instead populate the VOD event under the corresponding
VOD server that is the source of the VOD flow.
Workaround
None.
CSCtg85605
CMM displays the ifindex for VidMon int name after router software upgrade
Conditions
After upgrading the software on an ASR 9000 or Cisco 7600, CMM displays the ifindex in place
of the interface name. Re-discovery of the router does not correct this.
Workaround
If the ASR 9000 or Cisco 7600 devices are already at the correct software revision when the
CMM domain is initially discovered, this should not be an issue.
If the ASR 9000 or Cisco 7600 devices are upgraded after CMM is running, you can resolve this issue by
deleting the domain in CMM and re-discovering the network.
deleting the domain in CMM and re-discovering the network.
Table 3
Open Defects in Cisco VAMS 3.0 (continued)
Defect ID
Description