Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
DLP-G266 Modify Backplane Port IP Settings in Security Mode
This task modifies the ONS 15454 backplane IP address, subnet
mask, and default router when security mode is enabled. It also
modifies settings that control backplane IP address visibility
in CTC and the ONS 15454 LCD.
mask, and default router when security mode is enabled. It also
modifies settings that control backplane IP address visibility
in CTC and the ONS 15454 LCD.
Purpose
TCC2P/TCC3/TNC/TNCE/TSC/TSCE cards must be installed.
Tools/Equipment
• "DLP-G46 Log into CTC" task in the "
" document.
• In the Cisco ONS 15454 DWDM Configuration Guide:
◦"NTP-G103 Back Up the Database" procedure in
the chapter "Maintain the Node".
◦DLP-G264 Enable Node Security Mode in the
chapter "Turn Up a Node" .
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Superuser only
Security Level
Provisioning an IP address that is incompatible with the ONS 15454 network might be service affecting.
Caution
This task cannot be performed on a secure mode NE that has been locked.
Caution
The options in this task are available only when TCC2P/TCC3/TNC/TNCE/TSC/TSCE cards are installed.
Note
Procedure
Step 1
Click the Provisioning > Security > Data Comm tabs.
Step 2
Modify the following fields, as necessary:
• IP Address
• Subnet Mask
• Default Router
38