Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
DLP-G459 Delete a Splitter Protection Group
This task deletes a splitter protection group on the OTU2_XP
card. For the TXPP_MR_2.5G, MXPP_MR_2.5G, or PSM
card, the splitter protection group is deleted when you delete
the card.
card. For the TXPP_MR_2.5G, MXPP_MR_2.5G, or PSM
card, the splitter protection group is deleted when you delete
the card.
Purpose
None
Tools/Equipment
"DLP-G46 Log into CTC" task in the "
" document.
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Provisioning or higher
Security Level
Procedure
Step 1
In node view (single-shelf mode) or shelf view (multishelf mode), click the Provisioning > Protection tabs.
Step 2
In the Protection Groups area, click the protection group you want to delete.
Step 3
Click Delete.
Step 4
Click Yes in the Delete Protection Group dialog box. Confirm that the changes appear.
Step 5
Return to your originating procedure (NTP).
NTP-G84 Initiate and Clear Y-Cable and Splitter External Switching Commands
This procedure describes how to apply and remove Manual
and Force protection switches on Y-cable and splitter protection
groups. It also describes how to apply and remove a Lock On
or Lock Out protection command to a Y-cable protection group.
and Force protection switches on Y-cable and splitter protection
groups. It also describes how to apply and remove a Lock On
or Lock Out protection command to a Y-cable protection group.
Purpose
None
Tools/Equipment
60