Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
Procedure
Step 1
In node view (single-shelf mode) or shelf view (multishelf mode), click the Maintenance > Protection tabs.
Step 2
In the Protection Groups area, click the protection group that contains the card you want to clear.
Step 3
In the Selected Group area, click the card that you want to clear.
Step 4
In the Switch Commands drop-down list, click Clear.
Step 5
Click Yes in the confirmation dialog box.
The Manual or Force protection switch is cleared.
The Manual or Force protection switch is cleared.
Step 6
Return to your originating procedure (NTP).
DLP-G181 Apply a Lock-On
This task prevents traffic from being switched from the
working/active card in a Y-cable protection group or port in a
splitter protection group.
working/active card in a Y-cable protection group or port in a
splitter protection group.
Purpose
None
Tools/Equipment
"DLP-G46 Log into CTC" task in the "
" document.
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Maintenance or higher
Security Level
You can apply the Lock On command only to the working/active card or port. If the working card or port
is standby (traffic is switched), the Lock On button is not available.
is standby (traffic is switched), the Lock On button is not available.
Caution
Procedure
Step 1
In node view (single-shelf mode) or shelf view (multishelf mode), click the Maintenance > Protection tabs.
Step 2
In the Protection Groups area, click the protection group that contains the card (Y-cable) or port (splitter) that you want
to lock on.
to lock on.
Step 3
In the Selected Group area, click the working/active card.
Step 4
In the Inhibit Switching drop-down list, click Lock On.
Step 5
Click Yes in the confirmation dialog box.
64