Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Guía De Instalación
10
Installing the TXP_MR_10E_C and TXP_MR_10E_L Cards in the Cisco ONS 15454 SONET/SDH
78-17338-01
TXP_MR_10E_L Card Specifications
•
Environmental
–
Operating temperature: –5 to +55 degrees Celsius (+23 to +113 degrees Fahrenheit)
–
Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 50.00 W (maximum), 1.11 A at –48 V, 136.6 BTU/hr
•
Dimensions
–
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 3.1 lb (1.3 kg)
TXP_MR_10E_L Card Specifications
The TXP_MR_10E_L card has the following specifications:
•
Line (trunk side)
–
Bit rate: OC-192/STM-64 (9.95328 Gbps), OTU2 (10.70923 Gbps), 10GE (10.3125 Gbps),
10GE into OTU2 (non-standard 10.0957 Gbps), 10G FC (10.51875 Gbps), or 10G FC into
OTU2 (non-standard 11.31764 Gbps)
10GE into OTU2 (non-standard 10.0957 Gbps), 10G FC (10.51875 Gbps), or 10G FC into
OTU2 (non-standard 11.31764 Gbps)
–
Code: Scrambled NRZ
–
Fiber: 1550-nm single-mode
–
Maximum chromatic dispersion allowance: +/– 1200 ps/nm (specified penalty)
–
Loopback modes: Terminal and facility
Caution
You must use a 15-dB fiber attenuator (10 to 20 dB) when working with the TXP_MR_10E_L
card in a loopback on the trunk port. Do not use direct fiber loopbacks with the
TXP_MR_10E_L card. Using direct fiber loopbacks causes irreparable damage to the
TXP_MR_10E_L card.
card in a loopback on the trunk port. Do not use direct fiber loopbacks with the
TXP_MR_10E_L card. Using direct fiber loopbacks causes irreparable damage to the
TXP_MR_10E_L card.
–
Connectors: LC
–
Compliance: Telcordia GR-253-CORE, ITU-T G.707, ITU-T G.957, and ITU-T G.709
•
Transmitter (trunk side)
–
Maximum transmitter output power: +6 dBm
–
Minimum transmitter output power: +2 dBm
–
Transmitter: LN external modulator transmitter
–
Wavelength stability (drift): +/– 25 picometers (pm)
Note
An optical device on the card keeps the laser wavelength locked as closely as possible to the ITU nominal
value. The allowed drift is +/– 25 pm.
value. The allowed drift is +/– 25 pm.
•
Receiver (trunk side)