Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
Module Name
MIB Number
SNMP-MPD-MIB.mib
126
SNMP-NOTIFY-MIB-rfc3413.mib
127
SNMP-PROXY-MIB-rfc3413.mib
128
SNMP-TARGET-MIB-rfc3413.mib
129
SNMP-USER-BASED-SM-MIB-rfc3414.mib
130
SNMP-VIEW-BASED-ACM-MIB-rfc3415.mib
131
SNMPv2-MIB-rfc1907.mib
132
SONET-MIB-rfc2558.mib
133
If you cannot compile the proprietary MIBs correctly, log into the Technical Support Website at
or call Cisco TAC (800) 553-2447.
Note
When SNMP indicates that the wavelength is unknown, it means that the corresponding card
(MXP_2.5G_10E, TXP_MR_10E, MXP_2.5G_10G, TXP_MR_10G, TXP_MR_2.5G, or TXPP_MR_2.5G)
works with the first tunable wavelength. For more information about MXP and TXP cards, see the
“Provisioning Transponder and Muxponder Cards” chapter in the Cisco ONS 15454 DWDM Line Card
Configuration Guide.
(MXP_2.5G_10E, TXP_MR_10E, MXP_2.5G_10G, TXP_MR_10G, TXP_MR_2.5G, or TXPP_MR_2.5G)
works with the first tunable wavelength. For more information about MXP and TXP cards, see the
“Provisioning Transponder and Muxponder Cards” chapter in the Cisco ONS 15454 DWDM Line Card
Configuration Guide.
Note
Generic Threshold and Performance Monitoring MIBs
A MIB called CERENT-GENERIC-PM-MIB allows network management stations (NMS) to use a single, generic MIB for accessing
threshold and performance monitoring data of different interface types. The MIB is generic in the sense that it is not tied to any
particular kind of interface. The MIB objects can be used to obtain threshold values, current performance monitoring (PM) counts,
and historic PM statistics for each kind of monitor and any supported interval at the near end and far end.
threshold and performance monitoring data of different interface types. The MIB is generic in the sense that it is not tied to any
particular kind of interface. The MIB objects can be used to obtain threshold values, current performance monitoring (PM) counts,
and historic PM statistics for each kind of monitor and any supported interval at the near end and far end.
Previously existing MIBs in the ONS 15454 system provide some of these counts. For example, SONET interface 15-minute current
PM counts and historic PM statistics are available using the SONET-MIB. DS-1 and DS-3 counts and statistics are available through
the DS1-MIB and DS-3 MIB respectively. The generic MIB provides these types of information and also fetches threshold values
and single-day statistics. In addition, the MIB supports optics and dense wavelength division multiplexing (DWDM) threshold and
performance monitoring information.
PM counts and historic PM statistics are available using the SONET-MIB. DS-1 and DS-3 counts and statistics are available through
the DS1-MIB and DS-3 MIB respectively. The generic MIB provides these types of information and also fetches threshold values
and single-day statistics. In addition, the MIB supports optics and dense wavelength division multiplexing (DWDM) threshold and
performance monitoring information.
The CERENT-GENERIC-PM-MIB is organized into three different tables:
• cerentGenericPmThresholdTable
• cerentGenericPmStatsCurrentTable
• cerentGenericPmStatsIntervalTable
14