Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP) Hoja De Datos
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 8
Component
Deployment Application
4-degree single-module
ROADM mesh patch panel
ROADM mesh patch panel
This passive 1RU is used in multi-degree ROADM nodes with up to four 40-SMR2-C units to provide broadcast
functionalities and replicate to all the directions of the node the wavelengths to be routed through the ROADM node.
functionalities and replicate to all the directions of the node the wavelengths to be routed through the ROADM node.
The Cisco ONS 15454 single-module ROADM cards (40-SMR1-C and 40-SMR2-C) operate on the ITU 100-GHz
wavelength plan. Each card integrates automatic per-channel power monitor and control capabilities, providing node-
and network-based automatic-power-level management on each input and output port. Per-channel optical path
selection is also done in a completely automated way through Wavelength Path Provisioning (WPP) at the network
level, featuring end-to-end, point-and-click wavelength provisioning and easy SONET/SDH-like wavelength
management.
The ROADM node architecture has been specifically defined and engineered to provide:
●
High reliability
– Enables complete independence between specific direction-facing units with the possibility
to house units in physically separated shelves.
●
Automatic optical power balancing
– Per-channel automatic power control allows a “self-healing” intelligent
approach to DWDM, which is unique in the market.
●
Low insertion loss
– Selected technology allows direct integration of different functionalities in the same
optical module, reducing to the bare minimum the number of optical connections.
●
Reduced footprint
– SMR units integrate multiple functions into a single card (amplification, OSC add/drop,
ROADM, and power monitoring), reducing node power consumption and increasing shelf throughput.
The optical cards incorporate faceplate-mounted LEDs to provide a quick visual check of the operational status at the
card. Printed on each of the faceplates is an icon, an orange circle, which is mapped to shelf-slot icons indicating the
shelf slot where the card can be physically installed. The cards are supported by the integrated Cisco ONS 15454
Cisco Transport Controller craft manager, which provides the user access for operations, administration,
maintenance, and provisioning (OAM&P) for the system. Taking advantage of the embedded units
’ capabilities, Cisco
Transport Controller can also provide a per-channel graphical representation of the optical power levels associated
with each individual path in the ROADM nodes (Figure 2).
Figure 2. Cisco Transport Control Per-Channel Optical Power Monitoring Representation