Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
DLP-G686 Set the TNC ,TNCE, and TNCS Card RMON Thresholds for the FE/ONE_GE Ethernet
Payloads
Payloads
This task sets the RMON threshold settings for TNC ,TNCE,
and TNCS cards carrying the FE/ONE_GE payloads.
and TNCS cards carrying the FE/ONE_GE payloads.
Purpose
None
Tools/Equipment
"DLP-G46 Log into CTC" task at
document.
"DLP-G605 Provision PPM and Port for the TNC ,TNCE, and
TNCS Cards" in the Cisco ONS 15454 Hardware Installation
Guide
TNCS Cards" in the Cisco ONS 15454 Hardware Installation
Guide
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Provisioning or higher
Security Level
This task can only be performed if the TNC ,TNCE, and TNCS cards have at least one PPM port provisioned
for FE or ONE_GE payloads.
for FE or ONE_GE payloads.
Note
Procedure
Step 1
In node view (single-shelf mode) or shelf view (multishelf view), display the TNC ,TNCE, and TNCS cards where you
want to set the RMON thresholds.
want to set the RMON thresholds.
Step 2
Click the Provisioning > RMON Thresholds tabs.
Step 3
Click Create. The Create Threshold dialog box appears.
Step 4
From the Port drop-down list, choose an individual port (FE or ONE_GE), or choose All to provision RMON thresholds
for all ports.
for all ports.
Step 5
From the Variable drop-down list, choose an Ethernet variable. See the following table for a list of available Ethernet
RMON variables.
RMON variables.
Table 37: TNC and TNCE cards FE and ONE_GE RMON Thresholds
Description
Variable
Total number of octets received on the interface, including
framing characters.
framing characters.
iflnOctets
Total number of receive packets.
rxTotalPkts
64