Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
DLP-G393 Refresh Ethernet PM Counts at a Different Time Interval for GE_XP, 10GE_XP, GE_XPE,
and 10GE_XPE Cards
and 10GE_XPE Cards
This task changes the window view to display specified PM
counts in time intervals depending on the interval option
selected for GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE
cards.
counts in time intervals depending on the interval option
selected for GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE
cards.
Purpose
None
Tools/Equipment
"DLP-G46 Log into CTC" task at
document.
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Retrieve or higher
Security Level
Procedure
Step 1
In node view (single-shelf mode), or shelf view (multishelf mode), double-click the GE_XP, 10GE_XP, GE_XPE, or
10GE_XPE card where you want to view PM counts. The card view appears.
10GE_XPE card where you want to view PM counts. The card view appears.
Step 2
Click the Performance tab.
Step 3
Click the Ether Ports > Utilization or the Ether Ports > History tabs.
Step 4
From the Interval drop-down list, choose one of four options:
• 1 min : This option shows the specified PM counts in one-minute time intervals.
• 15 min : This option shows the specified PM counts in 15-minute time intervals.
• 1 hour : This option shows the specified PM counts in one-hour time intervals.
• 1 day : This option shows the specified PM counts in one-day (24 hours) time intervals.
Step 5
Click Refresh. The PM counts refresh with values based on the selected time interval.
Step 6
Return to your originating procedure (NTP).
84