Cisco Cisco Transport Manager 9.1 Referencia técnica
MTNM IMPLEMENTATION STATEMENT TEMPLATES AND GUIDELINES
TMF 814Av3.0
TeleManagement Forum 2003
35
supported
by this ME
type>
by this ME
type>
setTPData M
Y
ProcessingF
ailureExcept
ion
<setTPData:
not
supported
by this ME
type>
ailureExcept
ion
<setTPData:
not
supported
by this ME
type>
<Can not
getTP setTP
on a
protecting
equipment,
All the
information
should be
retrieved
from the
protected
equipment.>
<The CTP is
not an
inUsed and
not an
inSpan
CTP: >
CTP: >
<Unable to
remove port
loopback
cannot
change the
port to
inservice>
<The
SetTPData
for FTP is
supported
only for
Ethernet
cards
except E
series cards
:>
<setTPData
not
supported
for this TP.>
The results tell the NMS
which modifications
succeeded. If the
equipment is the
protecting equipment in a
1_For_N protection
group, CTM does not
allow user to set
parameters for TPs on
that protecting equipment.
If the equipment is the
protecting equipment in a
1_For_N protection
group, CTM does not
allow setting for
“AlarmReporting” for the
PTPs on the equipment.
CTM supports the
TrailTraceExpectedRx,
TrailTraceActualTx, and
TrailTraceMonitor
parameters for FTPs.
which modifications
succeeded. If the
equipment is the
protecting equipment in a
1_For_N protection
group, CTM does not
allow user to set
parameters for TPs on
that protecting equipment.
If the equipment is the
protecting equipment in a
1_For_N protection
group, CTM does not
allow setting for
“AlarmReporting” for the
PTPs on the equipment.
CTM supports the
TrailTraceExpectedRx,
TrailTraceActualTx, and
TrailTraceMonitor
parameters for FTPs.
CTM supports the following
parameters for CTPs:
parameters for CTPs:
o IPPMMonitor
o XCLoopback
o TrailTraceActualTx
oTrailTraceExpectedRx
o TrailTraceMonitor
Version 3.0 Additions
createGTP O
deleteGTP
O
getAllFixedCrossConnections O
getAllFTPNames O