Cisco Cisco Prime Network 4.2 Guía De Instalación
8
25
TCP
Database server > SMTP
server
server
SMTP port recommended for an embedded database
If gateway server and database server are different, keep port 25
open on both.
open on both.
Note
If you do not want to receive e-mail notifications, you do
not have to configure the SMTP server.
not have to configure the SMTP server.
69
UDP
Network Elements >
Gateway
Gateway
Transferring images to and from network elements
69
UDP
Network Elements > Unit
•
Default TFTP server on Prime Network units
•
AVM 83, which is the TFTP server used by Change and
Configuration Management
Configuration Management
Note
To use AVM 83, you must disable the default TFTP server
such that the port is free and available. Otherwise, Change
and Configuration Management operations will fail.
such that the port is free and available. Otherwise, Change
and Configuration Management operations will fail.
123
UDP
Unit > Gateway
NTP synchronization between gateway and units
123
UDP
Gateway > NTP Server 1
NTP synchronization for gateway
161
1161
UDP, Linux
only
only
Unit > Network Elements
For Units with VNEs, these ports are used for SNMP polling by the
VNEs.
VNEs.
For Units with AVM100, if you use SNMP V3
161
1161
UDP, Linux
only
only
Network Elements > Unit
Note
For 161 (UDP), if
AVM100 resides on
the gateway, the
Network Elements
sends to the
Gateway.
AVM100 resides on
the gateway, the
Network Elements
sends to the
Gateway.
For Units with AVM100, you need these ports only if you use
SNMP V3 for engine discovery. You can free up this port if you are
managing the server via SNMP. To free this port, enter the
following command:
SNMP V3 for engine discovery. You can free up this port if you are
managing the server via SNMP. To free this port, enter the
following command:
iptables -D PREROUTING -p udp -m udp --dport 161 -j
REDIRECT --to-ports 1161
Note
For 161 (UDP), if AVM100 resides on the gateway, the
Network Elements sends to the gateway.
Network Elements sends to the gateway.
162
1162
UDP, Linux
only
only
Network Elements > Unit
Note
For 162 (UDP), if
AVM100 resides on
the gateway, the
Network Elements
sends to the
Gateway.
AVM100 resides on
the gateway, the
Network Elements
sends to the
Gateway.
For Units with AVM100, these ports are used for traps.
Note
For 162 (UDP), if AVM100 resides on the gateway, the
Network Elements sends to the gateway.
Network Elements sends to the gateway.
162
1162
UDP, Linux
only
only
Unit > Network Elements
SNMP V3 inform replies
162 TCP/UDP
Gateway
>
Northbound NMS EPM MIB notifications
514
UDP
Network Elements > Unit
Note
If AVM100 resides
on the gateway, the
Network Elements
sends to the
Gateway.
on the gateway, the
Network Elements
sends to the
Gateway.
Syslogs
Note
If port 514 is occupied when you install Cisco Prime
Network, you are prompted to make the port available.
However, you are given the option to continue with port
514 occupied, and the installation completes successfully.
Network, you are prompted to make the port available.
However, you are given the option to continue with port
514 occupied, and the installation completes successfully.
Table 6
Ports Used by Prime Network
Port
Protocol
Direction
Usage