Cisco Cisco Extensible Network Controller (XNC) Version 1.5 Notas de publicación
6
Cisco Extensible Network Controller Release Notes, Release 1.0 and 1.5
OL-30571-01
Open Caveats
The following caveats are open in Release 1.0:
.
CSCuj26104
Custom paths cannot be created using northbound APIs.
Use the GUI to create custom paths.
CSCum44054
Static flow entries cannot be modified when using onePK.
Create a new static flow entry with the
changes that you want to make and delete the
previous one.
changes that you want to make and delete the
previous one.
CSCul56895
If you start the Cisco Monitor Manager application
immediately after upgrade, the browser may be directed to
http://<ip_address>:8080/monitor/j_security_check and you
may see a 404 error.
immediately after upgrade, the browser may be directed to
http://<ip_address>:8080/monitor/j_security_check and you
may see a 404 error.
Perform the following:
•
Wait until the controller has fully
initialized before accessing the GUI.
initialized before accessing the GUI.
•
Clear your browser cache and cookies.
•
Remove “j_security_check” from the
URL.
URL.
CSCuj39532
When using HA clustering, if the current coordinator is
brought down at the same time that a new node is brought up,
the caches may stop syncing.
brought down at the same time that a new node is brought up,
the caches may stop syncing.
Do not stop the cluster coordinator and bring
up a new node at the same time.
up a new node at the same time.
CSCum54358
Configuring a static flow with 5 parameter matches with the
set Source MAC Address or set Destination MAC Address
action fails when using onePK to communicate between the
controller and the network device. You will see the following
error:
set Source MAC Address or set Destination MAC Address
action fails when using onePK to communicate between the
controller and the network device. You will see the following
error:
Caught exception while adding action fields for
flow
There is no workaround for this issue. The set
Source MAC Address and set Destination
MAC Address actions are not supported with
onePK.
Source MAC Address and set Destination
MAC Address actions are not supported with
onePK.
CSCum54401
Configuring a static flow with 5 parameter matches with the
set VLAN ID action fails when using onePK to communicate
between the controller and the network device. You will see
the following error:
set VLAN ID action fails when using onePK to communicate
between the controller and the network device. You will see
the following error:
Caught exception while adding
action fields for flow
There is no workaround for this issue. The set
VLAN ID action is not supported with
onePK.
VLAN ID action is not supported with
onePK.
CSCum54799
Configuring a static flow with 5 parameter matches with the
set VLAN priority action fails when using onePK to
communicate between the controller and the network device.
You will see the following error:
set VLAN priority action fails when using onePK to
communicate between the controller and the network device.
You will see the following error:
Caught exception while
adding action fields for flow
There is no workaround for this issue. The set
VLAN priority action is not supported with
onePK.
VLAN priority action is not supported with
onePK.
Table 5
Open Caveats in Release 1.5
Defect ID
Symptom
Workaround
Table 6
Open Caveats in Release 1.0
Defect ID
Symptom
Workaround
CSCuj66859
The Cisco XNC backup script outputs the incorrect filename
to the console when it is run. The actual file output is
to the console when it is run. The actual file output is
xnc-
yy-mm-dd_time.tar
, but the script displays
yy-mm-dd_time.tar
.
When you run the restore script, prepend the
prefix
prefix
xnc-
before the filename.
Resolved in Release 1.5.
CSCuj64658
Metrics configured using a northbound API for a custom
property template of type ‘string’ are not visible in the Cisco
XNC GUI.
property template of type ‘string’ are not visible in the Cisco
XNC GUI.
In the Network Properties tab, click the
custom property template, then click Add
Metric to create a metric.
custom property template, then click Add
Metric to create a metric.
CSCuf56767
Existing flows and rules cannot be edited.
Delete the flow or rule that you want to
change and create a new one.
change and create a new one.