Cisco PowerKEY CableCARD Module 803 Guía Del Usuario
Configure Copy Protection Authorization on the DNCS
4017453 Rev B
25
Editing the CableCARD or M-Card Module and Host in the DNCS
After adding and saving the CableCARD or M-Card module and its associated host
device on the DNCS, you can modify the host ID information and change whether or
not the host is bound to the CableCARD or M-Card module, in order to authorize or
deauthorize the host for copy-protected content.
device on the DNCS, you can modify the host ID information and change whether or
not the host is bound to the CableCARD or M-Card module, in order to authorize or
deauthorize the host for copy-protected content.
Note: If you need to modify a parameter other than the host ID or the bind status, you
must delete the CableCARD or M-Card module using the Delete Selected
CableCARD link on the CableCARD Data Summary screen and then re-enter the
CableCARD or M-Card module information.
1 From the CableCARD Data Summary window, click the corresponding circle in
must delete the CableCARD or M-Card module using the Delete Selected
CableCARD link on the CableCARD Data Summary screen and then re-enter the
CableCARD or M-Card module information.
1 From the CableCARD Data Summary window, click the corresponding circle in
the Select column to choose the CableCARD or M-Card module and host device
that you want to modify.
that you want to modify.
2 Click Modify Selected CableCARD from the left side of the window. The
Modify CableCARD window opens.
3 Refer to the DNCS Online Help for specific steps to modify the CableCARD or
M-Card module in the DNCS regarding the host ID or the unbind host status of
the CableCARD or M-Card module.
the CableCARD or M-Card module.
4 When you are finished, click Save CableCARD to save any changes that you
made.
5 Click Exit All CableCARD Screens to close the Modify CableCARD window.