Cisco Multi-Stream CableCARD Module Guía Del Usuario
Configure the DNCS for CableCARD and M-Card Support
4021652 Rev B
7
4 Click Yes to confirm that you want to stop the siManager process. The indicator
next to siManager turns red to identify that the process is stopped.
5 With the siManager process selected, click Process and select Start Process.
Results:
The indicator next to the siManager process changes to yellow and then
green to indicate that the process is active and running.
green to indicate that the process is active and running.
Several other processes may also turn yellow while siManager is stopped.
This does not indicate a problem.
This does not indicate a problem.
The SI tables are updated on the system.
Understand Binding Types
Binding is a DNCS function that matches the CableCARD or M-Card module to the
host. You must bind a CableCARD or M-Card module to its host before the host can
display "high-value" copy-protected services (services with copy protection settings
of either copy one generation or copy never).
host. You must bind a CableCARD or M-Card module to its host before the host can
display "high-value" copy-protected services (services with copy protection settings
of either copy one generation or copy never).
Important:
Until you bind the host and the CableCARD or M-Card module, the host will not
be able to display "high-value" copy-protected services—even if the CableCARD
or M-Card is authorized to receive these services.
be able to display "high-value" copy-protected services—even if the CableCARD
or M-Card is authorized to receive these services.
Services that are copy protected with the copy protection setting of copy freely can
be viewed by an unbound host if conditional access is authorized.
be viewed by an unbound host if conditional access is authorized.
The following copy protection binding methods are available on your system:
Autobinding matches a CableCARD or M-Card module and host when the
CableCARD or M-Card module is inserted into a host that supports two-way
communications. Autobinding will be supported if all of the following
conditions are met:
CableCARD or M-Card module is inserted into a host that supports two-way
communications. Autobinding will be supported if all of the following
conditions are met:
-
The DNCS is configured to support autobinding.
-
The host supports two-way communications.
-
The CableCARD or M-Card module obtains an IP address.
Note: To support autobinding, the CableCARD or M-Card module and host
must be bound in a two-way environment. Once bound, they may be
operated in a one-way environment to view high-value content.
Note: To support autobinding, the CableCARD or M-Card module and host
must be bound in a two-way environment. Once bound, they may be
operated in a one-way environment to view high-value content.
-
The host is not on the certificate revocation list (CRL).
-
If autobinding with a different host, then the CableCARD or MCard’s host
change count should not equal or exceed the system’s Max Host Change
Count Allowed setting.
change count should not equal or exceed the system’s Max Host Change
Count Allowed setting.