Cisco PowerKEY CableCARD Module 803 Guía Del Usuario
Configure the DNCS for CableCARD and M-Card Support
4021652 Rev B
15
The following illustration is an example of the CableCARD MMI Copy Protection
screen.
screen.
Note: Refer to the DNCS Online Help for a detailed description of the fields in the Set
CableCARD MMI Copy Protection screen.
CableCARD MMI Copy Protection screen.
Complete the following steps to display the Set CableCARD MMI Copy Protection
screen.
screen.
Important: This procedure also configures the DNCS for autobinding. To disable
autobinding go to Disabling Autobinding (on page 16).
1 Is the CableCARD Data Summary screen open?
autobinding go to Disabling Autobinding (on page 16).
1 Is the CableCARD Data Summary screen open?
If yes, go to step 5.
If no, go to step 2.
2 On the DNCS Administrative Console, click the DNCS tab.
3 Click the Home Element Provisioning tab.
4 Click CableCARD. The CableCARD Data Summary screen opens.
5 Click MMI Screen Format. The Set CableCARD MMI Copy Protection screen
3 Click the Home Element Provisioning tab.
4 Click CableCARD. The CableCARD Data Summary screen opens.
5 Click MMI Screen Format. The Set CableCARD MMI Copy Protection screen
opens.
6 Refer to the DNCS Online Help for additional details on configuring the Set
CableCARD MMI Copy Protection screen.