Cisco PowerKEY CableCARD Module Guía De Instalación

CAUTION: Do not try to force the module into the slot. Doing so
could damage the module, the home terminal, or the TV.

3. After you insert the module, the module and host device IDs appear

automatically on your TV screen, along with instructions and a telephone
number to call.

Note: If you do not see this information on the TV screen, the module may
not be inserted properly. Try removing the module, then re-orienting and
re-inserting it. If the problem persists, contact your service provider.

Important: Do not remove the PowerKEY CableCARD Module after you
install it. Removing the module may cause a temporary loss of your
program services.

4. Record these IDs and the telephone number in the spaces below, and call

your service provider as instructed.

CableCARD ID: ________________________________________________

Host

ID:

______________________________________________________

Telephone

Number:

____________________________________________

Note: You may also need to give your service provider the alphanumeric
information you recorded earlier in the Before You Begin section.

5. Refer to the documentation that came with your TV or host device for

instructions on operating the TV or host device with the module.

If You Have Problems

• If you installed the PowerKEY CableCARD Module, and a code displays on

the front panel of the host device, refer to the documentation that came
with the host device for instructions.

• If you installed the PowerKEY CableCARD Module in a TV and received an

error message on the TV screen, refer to the documentation that came
with the TV for instructions.

• Contact your service provider if you continue to have problems.