Cisco Multi-Stream CableCARD Module Guía De Instalación
Chapter 6 Monitor and Troubleshoot the PCG API
48
78-4017672-01 Rev E
PCG Status
Introduction
The PCG is an SNMP-manageable device that comes with platform MIBs and a PCG
application MIB. The objects within the application MIB can be used by a network
manager to query DVB SimulCrypt, system configuration, and system status
information on the PCG. The application MIB also includes Notification objects
(traps) that can be used by a network manager to monitor events and alarm
conditions on the PCG.
application MIB. The objects within the application MIB can be used by a network
manager to query DVB SimulCrypt, system configuration, and system status
information on the PCG. The application MIB also includes Notification objects
(traps) that can be used by a network manager to monitor events and alarm
conditions on the PCG.
The SNMP interface on the PCG supports only SNMPv3 by default. The PCG is
delivered with a default SNMPv3 user name, authentication passphrase, and privacy
passphrase. Contact your account representative to obtain these values and for
instructions on changing the default SNMPv3 values, defining trap destinations,
modifying the interface to support SNMPv2, and general MIB information.
delivered with a default SNMPv3 user name, authentication passphrase, and privacy
passphrase. Contact your account representative to obtain these values and for
instructions on changing the default SNMPv3 values, defining trap destinations,
modifying the interface to support SNMPv2, and general MIB information.
Checking the PCG Status
To find a list of commands used to check the status of the PCG, type help all at the
PCG> prompt. The following table describes these commands.
PCG> prompt. The following table describes these commands.
Command
Description