Cisco PowerKEY CableCARD Module 800 Guía Del Usuario
Configure the DNCS for CableCARD and M-Card Support
78-4011765-01 Rev C
9
9 Type the phone number representing your customer service center in the
following format:
Ph#: (770) 555-1212
Ph#: (770) 555-1212
10 Press the Esc key to exit from the insert mode.
11 Type the following command: :wq! and press Enter. The system saves the
11 Type the following command: :wq! and press Enter. The system saves the
mmi.txt file and the vi editor closes.
12 Type more mmi.txt at the command prompt. The contents of the mmi.txt file
display on the next line of the xterm window.
Example: $ more mmi.txt
Example: $ more mmi.txt
Ph#: (770) 555-1212
Creating the gfc.txt File
1 If necessary, complete steps 1 through 3 from the previous procedure, Creating
1 If necessary, complete steps 1 through 3 from the previous procedure, Creating
the mmi.txt File, to open an xterm window.
2 Type ls –l and press Enter to see a list of files in this directory.
3 Does the directory include a file called gfc.txt?
3 Does the directory include a file called gfc.txt?
If yes, you do not need to create the file.
If no, you need to create the gfc.txt file. Go to step 4.
4 Type the following command: vi gfc.txt and press Enter. The vi editor opens.
5 Type i, where i represents the Insert command.
6 Type F01:03 01 and press Enter, where 03 is the output channel for the DHCT
5 Type i, where i represents the Insert command.
6 Type F01:03 01 and press Enter, where 03 is the output channel for the DHCT
host.
Note: Type F01:04 01 if the output is on channel 4.
Note: Type F01:04 01 if the output is on channel 4.
7 Press the Esc key to exit the insert mode.
8 Type the following command: :wq! and press Enter. The system saves the gfc.txt
8 Type the following command: :wq! and press Enter. The system saves the gfc.txt
file and the vi editor closes.
9 Type more gfc.txt at the command prompt. The contents of the gfc.txt file
display on the next line of the xterm window.
Example: $ more gfc.txt
Example: $ more gfc.txt
F01:03 01
Adding the mmi.txt and gfc.txt Files to the POD_Data BFS Server
To allow the CableCARD and M-Card modules to have access to the mmi.txt and
To allow the CableCARD and M-Card modules to have access to the mmi.txt and
gfc.txt files, link each file to the POD_Data BFS server. To do so, complete the
following steps.
1 From the Application Interface Modules tab, click BFS Client.
2 Double-click the server (POD_Data) to list the contents of the server and
1 From the Application Interface Modules tab, click BFS Client.
2 Double-click the server (POD_Data) to list the contents of the server and
determine if the mmi.txt and gfc.txt links exist.