Cisco Multi-Stream CableCARD Module Guía De Instalación
4034718 Rev B
1
Introduction
This chapter describes the PowerKEY Encryption Server (PKES) and
outlines the procedures required for installing the PKES hardware.
After installing the server into the rack, see PKES Front Panel (on
page 8) and PKES Back Panel (on page 9) to become familiar with the
device.
outlines the procedures required for installing the PKES hardware.
After installing the server into the rack, see PKES Front Panel (on
page 8) and PKES Back Panel (on page 9) to become familiar with the
device.
If you are installing PKES software for the first time, complete the
procedures in Chapters 1 through 4. If you are upgrading the PKES,
complete the procedures in Chapter 5.
procedures in Chapters 1 through 4. If you are upgrading the PKES,
complete the procedures in Chapter 5.
1
Chapter 1
PKES Hardware Installation
In This Chapter
Overview of the PowerKEY Encryption Server ................................. 2
The PKES Hardware ............................................................................... 3
Rack Mounting ........................................................................................ 4
PKES Front Panel Illustration ............................................................... 8
PKES Back Panel Illustration ................................................................. 9