Cisco PowerKEY CableCARD Module 800 Referencia técnica
About This Guide
78-4015203-01 Rev D
v
About This Guide
Introduction
The diagnostic screens for the single-stream CableCARD™ (S-Card) and Multi-
Stream CableCARD (M-Card™) modules are described in this reference guide. The
diagnostic screen data provide a detailed profile of CableCARD performance that
can be used to monitor and troubleshoot CableCARD operation.
Stream CableCARD (M-Card™) modules are described in this reference guide. The
diagnostic screen data provide a detailed profile of CableCARD performance that
can be used to monitor and troubleshoot CableCARD operation.
Purpose
After reading this guide, you will be able to use the diagnostic screens to identify
and evaluate status and performance information for S-Card and M-Card modules
in your system. The following list includes some of the tasks you can perform using
the diagnostic screens:
and evaluate status and performance information for S-Card and M-Card modules
in your system. The following list includes some of the tasks you can perform using
the diagnostic screens:
Determine the hardware model and version number of the S-Card or M-Card
module
module
Determine the MAC address of the S-Card or M-Card module
Determine the IP address of the S-Card or M-Card module
Verify the host ID number
Verify the ECM and EMM counts
Determine if there has been a decryption failure, and if so, when it occurred
Determine the customer service number you need to start service
Verify the current copy protection authorization
Determine the operating status of the DCD initialization process (M-Card
module only)
module only)
Audience
This guide is written for network operators and Cisco personnel who have
experience with accessing the diagnostic screens for S-Card and M-Card modules.
experience with accessing the diagnostic screens for S-Card and M-Card modules.