Cisco Multi-Stream CableCARD Module Referencia técnica
2
78-4024316-01 Rev B
About This Bulletin
Determine the BFS QAM Output Frequency
At the BFS QAM front panel, press FREQ to display the Output Frequency screen.
If the output frequency is below 204 MHz, it will be necessary for you to change the
output frequency during a maintenance window prior to downloading software to
M-Card modules.
Change the BFS QAM Output Frequency
To modify a BFS QAM on your system, complete this procedure during a
maintenance window.
Note: This procedure is required for each BFS QAM that you want to change.
1 At the BFS QAM front panel, press OPTIONS, scroll to Sessions Count, and
Note: This procedure is required for each BFS QAM that you want to change.
1 At the BFS QAM front panel, press OPTIONS, scroll to Sessions Count, and
record the number of sessions. You will need this number later to verify the
restoration of sessions.
2 Press OPTIONS again, scroll to Program Count, and record the number of
programs (encrypted sessions). You will need this number later to verify the
restoration of programs.