Cisco Cisco D9859 Advanced Receiver Transcoder Guía De Instalación
Setup Menu
OL-31980-01
93
Menu Item
Description
Parameters
Config Type Indicates the current DPM
configuration change by a user
after changing the Output Mode.
after changing the Output Mode.
Edited by User - DPM changes were made.
Unmodified - No changes were made after setting
a new Output Mode.
a new Output Mode.
Auto Re-Mapped - Output map changed
automatically to fix the output channel or PID
conflicts at the time of setup.
conflicts at the time of setup.
Changed by Uplink - DPM output changes were
initiated by an encoder.
initiated by an encoder.
Descramble
Mode
Mode
Select whether the output will be
descrambled if the input is
scrambled.
scrambled.
Scrambled - The output channel will remain
scrambled even if the PE is authorized and can
descramble the channel.
descramble the channel.
Descrambled - Descrambles the output channel,
and passes in-the-clear channels.
and passes in-the-clear channels.
The default is Descrambled.
Insert Null
Packet
Packet
Select whether to insert null
packets into the output to
maintain output at a constant bit
rate.
maintain output at a constant bit
rate.
Yes or No
Note: It is recommended that the Insert Null
Note: It is recommended that the Insert Null
Packet is set to Yes, especially if the Output Mode
is set to Transcoding.
is set to Transcoding.
Auto Map
Sets whether the DPM resolves
the channel and PID collisions
automatically on the transport
outputs. New values are assigned
to the parameters that caused the
conflict. The new assigned values
automatically on the transport
outputs. New values are assigned
to the parameters that caused the
conflict. The new assigned values
are not used by any incoming
transport or other PE outputs. If a
collision is detected, you can
review the new changes before
applying the new changes.
transport or other PE outputs. If a
collision is detected, you can
review the new changes before
applying the new changes.
Yes or No
Auto Map
Aux
Aux
Select whether the DPM sets the
output actions for all the auxiliary
PEs to Map when the Output
Mode is set to Transcode. If the
Fixed Output is set to Yes, the
output configuration for the
auxiliary PEs is determined by
the fixed output table options
when you resynchronize the
output channels and PIDs to
match the input programs.
Note: The DPM resolves any
output conflicts automatically,
even if the Auto Map is set to No.
Mode is set to Transcode. If the
Fixed Output is set to Yes, the
output configuration for the
auxiliary PEs is determined by
the fixed output table options
when you resynchronize the
output channels and PIDs to
match the input programs.
Note: The DPM resolves any
output conflicts automatically,
even if the Auto Map is set to No.
Yes or No