Cisco Cisco D9824 Advanced Multi Decryption Receiver Guía De Instalación
Chapter 4 Front Panel Operation
52
OL-29015-01
Menu Item
Description
Parameters
Stream Overflow
Indicates the MPEG over IP transport stream(s)
overflow status.
overflow status.
Yes or No
Combined User
Rate
Rate
Displays the combined output bit rate for all the
configured streams (including FEC).
configured streams (including FEC).
–
Actual Rate Port
1/2
1/2
Displays the current output bit rates for Data1 and
Data2 ports (including FEC).
Data2 ports (including FEC).
0 to 206 Mbps
MOIP Out Stream Status
Menu Item
Description
Parameters
PE ID
Displays the program entry channel.
1 to 32
Stream Port1/Port2 Indicates the stream status of the Data1 and Data2
ports.
Stopped, Suspended,
Active, or Muted
Active, or Muted
Content Overflow Indicates if the rate of the transport stream(s) to be
encapsulated (including FEC) is higher than the
configured output bit rate.
configured output bit rate.
Yes or No
Link Overflow
Indicates if the configured output bit rate
(including FEC) is close or higher than the current
Ethernet link speed for the Ethernet port used for
MPEGoIP output.
(including FEC) is close or higher than the current
Ethernet link speed for the Ethernet port used for
MPEGoIP output.
Yes or No
MOIP In Redundancy Status
Menu Item
Description
Parameters
Port In Use
The current input port in use.
Data1 or Data2
Change Reason
Description of the reason for the last redundancy
status change.
status change.
None, Setup,
EthLinkStatus, TS
Status, ProgStatus
EthLinkStatus, TS
Status, ProgStatus
Change Date &
Time
Time
Displays the last date and time the redundancy
status changed.
status changed.
YYYY/MM/DD
HH:MM:SS
HH:MM:SS
MOIP In IP Source Status
Menu Item
Description
Parameters
Data1/Data2
Source Host
Source Host
When locked, this displays the source/host IP
address of the originator. If the signal is not locked,
it will display N/A.
address of the originator. If the signal is not locked,
it will display N/A.