Cisco Cisco D9804 Multiple Transport Receiver Guía De Instalación
Status Menu
78-4042990-01 Rev B
37
Menu Item
Description
Parameters
Format
Indicates the current stream Format for the
selected ASI output.
selected ASI output.
Decombined - the selected CT
PID is decombined and
passed to the selected output.
PID is decombined and
passed to the selected output.
Remux - the CT ID is
remultiplexed when passed
to the selected output.
remultiplexed when passed
to the selected output.
Pass - only the PIDs listed in
the Filter Info table are
passed to the selected output.
the Filter Info table are
passed to the selected output.
Raw - the incoming stream is
passed to the selected output
as is with no changes.
passed to the selected output
as is with no changes.
Drop - all the PIDs except for
those selected to be dropped
are passed to the selected
output.
those selected to be dropped
are passed to the selected
output.
Stream Status
Indicates the Stream Status for the selected
ASI output.
ASI output.
Normal - ASI output is
operating normally.
operating normally.
Descramble Failed - An
incorrect BISS index is
selected or the BISS index
does not match the
scrambling index used by the
uplink (IBCC).
incorrect BISS index is
selected or the BISS index
does not match the
scrambling index used by the
uplink (IBCC).
Sync Lost - MTR is no longer
able to recognize or
synchronize with the MPEG
packets in the decombined
transport. The transport may
be corrupted, or the uplink
settings are incorrect for the
transport. This status could
also occur due to a loss of
input signal.
able to recognize or
synchronize with the MPEG
packets in the decombined
transport. The transport may
be corrupted, or the uplink
settings are incorrect for the
transport. This status could
also occur due to a loss of
input signal.
Muted - ASI output is
stopped due to a loss of input
or a problem with
decombining the transport.
The output may also be
muted by the uplink (IBCC).
stopped due to a loss of input
or a problem with
decombining the transport.
The output may also be
muted by the uplink (IBCC).
CT PID
Indicates the Combined Transport PID.
32 to 8191
Note: 8191 indicates there is
no PID assigned.
no PID assigned.