Cisco Cisco D9804 Multiple Transport Receiver Guía De Instalación
Appendix E
Compliance
188
78-4042990-01 Rev B
Applicable Standards and Notices
Safety
The D9804 Multiple Transport Receiver has been approved for safety by the
Standards Council of Canada and the OHSA (NRTL) Accredited Testing Laboratory
to the following standards:
Standards Council of Canada and the OHSA (NRTL) Accredited Testing Laboratory
to the following standards:
CAN/CSA-C22.2 No. 60950-1-03
ANSI/UL Std No. 60950-1-2003
Also, this product has been evaluated under the IECEE CB scheme to the following
international standard:
international standard:
IEC 60950-1 1st Ed
For the CB report and Certificate the product are evaluated for the country
differences outlined in CB Bulletin 109A:
differences outlined in CB Bulletin 109A:
EMC
Electrostatic Discharge (ESD) results from the static electricity buildup on the human
body and other objects. This static discharge can degrade components and cause
failures.
body and other objects. This static discharge can degrade components and cause
failures.
Take the following precautions against electrostatic discharge:
Use an anti-static bench mat and a wrist strap or ankle strap designed to safely
ground ESD potentials through a resistive element.
ground ESD potentials through a resistive element.
Keep components in their anti-static packaging until installed.
Avoid touching electronic components when installing a module.
Electromagnetic Compatibility Regulatory Requirements
Ethernet cables should be of single-shielded or double-shielded type. Coaxial cables
should be of the double-braided shielded type. Where this equipment is subject to
USA FCC and/or Industry Canada rules, the following statements apply:
should be of the double-braided shielded type. Where this equipment is subject to
USA FCC and/or Industry Canada rules, the following statements apply: