Cisco Cisco D9854 Advanced Program Receiver Guía De Instalación
Chapter 5 Web GUI Setup and Monitoring
212
Setting up Audio Parameters
1 From the user interface of the D9854/D9854-I, choose Audio & Video > Audio
Decoding. The Audio Decoding page is displayed.
2 The Audio Selection area allows you to select the audio PID for audio decoding.
The D9854/D9854-I supports two local audio devices.
a In the Select By drop-down list, choose the input source for Audio 1 or
a In the Select By drop-down list, choose the input source for Audio 1 or
Audio 2.
Note: You cannot select PMT order for one audio and Language List or
Language Entry for the other audio. For example, you cannot select PMT
Order for Audio 1 and Language List for Audio 2.
Language Entry for the other audio. For example, you cannot select PMT
Order for Audio 1 and Language List for Audio 2.
b If Language List is selected, you choose a language from the Language List
column. If Language Entry is selected, you must enter a language code in the
Manual Entry column. If the languages selected are different, the first PID
with the matching language will play on the appropriate audio device
(Audio 1 or Audio 2). If you select the same language for both Audio 1 and
Audio 2, the PIDs are mapped as follows: the first matching language PID to
Audio 1 and the second matching PID to Audio 2.
Manual Entry column. If the languages selected are different, the first PID
with the matching language will play on the appropriate audio device
(Audio 1 or Audio 2). If you select the same language for both Audio 1 and
Audio 2, the PIDs are mapped as follows: the first matching language PID to
Audio 1 and the second matching PID to Audio 2.