Cisco Cisco D9804 Multiple Transport Receiver Notas de publicación

 

 

 

Cisco D9804 Multiple Transport 
Receiver Software Version 2.10 
Release Note 

This document describes the new features and changes included in software 
version 2.10 for the Cisco

®

 D9804 Multiple Transport Receiver (MTR) since the 

previous version 1.18. 
The MTR product includes an FPGA that performs transport stream routing, 
decombining and deterministic remultiplexing (DM) functions.  

 

The DM application software provides six independent transport routing and 
decombining functions when operated with FPGA version 1.00, also known as 
the Base FPGA (6+0). 

 

The DM application provides four independent transport routing and 
decombining functions and one independent deterministic remultiplexing 
function when operated with FPGA version 2.00, also known as the DM FPGA 
(4+1).  

By default, the Base FPGA is selected. The FPGA type is user selectable if the DM 
FPGA is installed during upgrade or when the MTR is manufactured. 

 
 

The following repairs, new features, and enhancements are included in MTR 
software version 2.10. 
1  Added Deterministic Remultiplexing (DM) in conjunction with FPGA version 

2.00 (DM FPGA). 

Four simultaneous independent decombine operations supported 

One independent remultiplex output supported 

Operates in legacy mode with original Base FPGA (FPGA 1.0) and DM 
mode with new DM FPGA (FPGA 2.0) 

2  Added support for Over-the-Air application download from the IBCC, 

including trap messages to indicate successful and unsuccessful downloads. 

3  The following changes were made to the web user interface: 

a  Summary page includes additional information to identify the MTR and 

the active configuration of each ASI port.